When changing a memory card on a MicroPulse Controller, all of default operations, formulas, and totals need to be reset on the control.

From the Waiting to Load screen, enter a valid level 6 or 7 password.

1=Setups 2=Program
3=Maint. 4=Calibrate
5=Totals 6=Clock
Selection? 0=exit

Select 2=Program

1=Ops 2=Formulas
3=Clr Ops 4=Clr Forms
5=Copy 6=Vocabs
Selection? 0=exit

Select 3=Clr Ops

Load Defaults
Use YES/NO Keys
ENTER=accept 0=exit

Select YES then press [ENT]. This loads all default operations for quick reference.

1=Ops 2=Formulas
3=Clr Ops 4=Clr Forms
5=Copy 6=Vocabs
Selection? 0=exit

Select 4=Clr Forms

Load Defaults
Use YES/NO Keys
ENTER=accept 0=exit

Select YES then press [ENT]. This loads all default formulas for quick reference.

1=Ops 2=Formulas
3=Clr Ops 4=Clr Forms
5=Copy 6=Vocabs
Selection? 0=exit

Select 0=exit

1=Setups 2=Program
3=Maint. 4=Calibrate
5=Totals 6=Clock
Selection? 0=exit

Select 5=Totals

1=Review Totals
2+Clr= Clr Chem Data
3=Clr= Clr Run Data
Selection? 0=exit

Press [2] + [CLR] to clear the chemical data.

1=Review Totals
2+Clr= Clr Chem Data
3=Clr= Clr Run Data
Selection? 0=exit

Press [3] + [CLR] to clear the formula run data. Exit out of the control.

From the Waiting to Load screen, enter a valid level 7 password.

1=Setups 2=Program
3=Maint. 4=Calibrate
5=Totals 6=Clock
Selection? 0=exit

Select 1=Setups

1=Watch Dogs / Setups
2=Chemical Setups
3=Setup pH System (only if pH System = Yes in user defined setups)
Selection? 0=exit

Select 1=Watch Dogs / Setups

1=Machine Setup
2=Maintenance Setup
3=Clear Ram Vocabs
4=Passwords 0=exit

Select 3=Clear Ram Vocabs

Clear All Ram Vocabs

Key in Password!!!!
NO=exit

Enter a valid level 7 password and all Ram Vocabs are cleared loading all default vocabs. Exit out of the control.