Name the Operation
From the Waiting to Load screen, enter a valid level 6 or 7 password.

1=Setups 2=Program
3=Maint. 4=Calibrate
5=Copy 6=Clock
Selection? 0=exit

Select 2=Program

1=Ops 2=Formulas
3=Clr Ops 4=Clr Forms
5=Copy 6=Vocabs
Selection? 0=exit

Select 1=Ops

Key in Oper. # 0

ENTER= Accept NO = Exit

Scroll or enter the number that you wish to program and press [ENT].

1:001 ?OPERATION?
002 END OPERATION

3-e 5-s 0-exit
The first line is the active line and all editing operates on the contents of that line. Line 4 on the LCD lists the editing options that are possible. 3-e is for editing the top line. 5-s scrolls the LCD screen left and right. Only 20 characters may display on a line and this option allows more of the line to be viewed. Press [3] to edit.

Operation # 1
CLR= Set to Unused
ENT= Edit Name
0 = exit

Press the [CLR] key to set too unused. Press the [ENT] key to edit the operation name.
_
ENT= Character # 00
YES = Left NO = Right
YES + NO = Accept

The cursor (appears as a flashing line) the character position to be edited. With the cursor in position, key in the numerical code (see the ASCII reference) for the desired character. For example if you are programming WARM WATER RINSE. Press [7] then press [ENT]. The W will be shown now press the [NO] key to move the cursor right.

W_
ENT= Character # 87
YES = Left NO = Right
YES + NO = Accept

Continue with this sequence until you have programmed the desired operation name.

W=[7] [ENT] [NO]
A=[6][5] [ENT] [NO]
R=[2] [ENT] [NO]
M=[7][7] [ENT] [NO]
space=[3][2] [ENT] [NO]
W=[7] [ENT] [NO]
A=[6][5] [ENT] [NO]
T=[4] [ENT] [NO]
E=[6][9] [ENT] [NO]
R=[2] [ENT] [NO]
space=[3][2] [ENT] [NO]
F=[7][0] [ENT] [NO]
L=[7][6] [ENT] [NO]
U=[5] [ENT] [NO]
S=[3] [ENT] [NO]
H=[7][2] [ENT] [NO]

[YES]+[NO]

1:001 WARM WATER FLUSH
002 END OPERATION

3-e 5-s 0-exit

Now using the arrow keys, place the active line to the top line.

002 END OPERATION

1-i 2-d 3-e 5-s 0-exit

Line 4 on the LCD list the editing options that are possible. 1-i insert. 2-d delete. 3-e edit. 5-s shift. 0-exit. Press 1-i to insert an instruction. You will see "Wait to Satisfy". Scroll through the operation list using the arrow keys to the Water Fill Options and press [ENT]. Now scroll through the Water Fill Options list using the arrow keys to Fill Cold . Press [ENT].

Fill Cold
Key in Level 0.0

To fill to 10" of cold water, press [1][0][0]

002: Fill Cold 10.0 inc.
003: END OF OPERATION

1-i 2-d 3-e 5-s 0-exit

Press 1-i to insert an instruction. You will see "Wait to Satisfy". Scroll through the operation list using the arrow keys to the Water Fill Options and press [ENT]. Now scroll through the Water Fill Options list using the arrow keys to Fill Hot . Press [ENT].

Fill Hot
Key in Level 0.0

To fill to 10" of hot water, press [1][0][0]

003: Fill Hot 10.0 inc.
004: END OF OPERATION

1-i 2-d 3-e 5-s 0-exit

**PLEASE NOTE THAT WHEN CALLING FOR MULTIPLE WATER FILL OPTIONS IN AN OPERATION, THE CONTROL WILL FILL TO THE GREATEST LEVEL DESIRED. FOR EXAMPLE IF 10" OF COLD WATER WAS PROGRAMMED AND 11' OF HOT WATER WAS PROGRAMMED THE CONTROL WOULD TURN OFF THE COLD WATER VALVE AT THE 10" LEVEL (PLEASE REFER TO THE USER DEFINED SETUPS LEVEL DEADBAND) AND TURN THE HOT WATER VALVE AT THE 11" LEVEL. THE CONTROL WILL ONLY FILL TO AN 11" LEVEL NOT A 21" LEVEL. **

Now we will enter a Wait to Satisfy meaning that we want the machine to fill to a 10" water level using both hot and cold water valves before advancing on in the operation.

Press 1-i to insert an instruction. Scroll to the Wait to Satisfy option, press [ENT].

004: Wait to Satisfy
005: END OF OPERATION

1-i 2-d 3-e 5-s 0-exit

Now we will enter a run time. Press 1-i to insert an instruction. Scroll through the operation list using the arrow keys to the Run Time option and press [ENT].

Run Time
Key in time 00:00

To enter a 2-minute run time, press [2][0][0] then press [ENT].

005: Run Time 2:00
006: END OF OPERATION

1-i 2-d 3-e 5-s 0-exit
After our run time is entered we will need to drain the machine. To perform this instruction Press 1-i to insert an instruction. Scroll through the operation list using the arrow keys to the Drains / Extract option and press [ENT]. Scroll to the Drain 1 option and press [ENT].

Drain 1 Time
Key in time 00:00

To enter a 1-minute drain time, press [1][0][0] then press [ENT]. Following will be an example of the operation we just programmed into the control.

001: WARM WATER FLUSH
002: Fill Cold When Level < 10.0" Until Next Step
003: Fill Hot When Level < 10.0" Until Next Step
004: Wait to Satisfy
005: Run Time 2:00
006: Drain 1 Time for 1:00
007: END OF OPERATION